 |
||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||
Personal NotesSeat Pan and Bumper Re-ManufactureMichael Larsen, DenmarkSeat Pan Re-manufacture The seat pan is made of 1 mm steel , the bead is made in a bead roller .The z-profile that you see in picture 1 had to be made because my bead roller did not have enough throat to get the beads where I want them to be. This z-profile will be welded to the pan later . The "bulk" is an out door garden lamp! The other round piece I have make with a stretch tool, these 2 pieces will be welded together, and trimmed down to size. With the bead roller I will make an outer edge at the "bulk" at approx 90 degree. The inspection hole will be made with a hole saw. And all pieces welded together.
|
||||||||||||||||||||||||||||||||||||||
|
Front Bumper Re-manufacture
The front bumper is made out af 2 mm stainless steel , rolled in an English wheel , so it get a nice curve in both directions.
|
||||||||||||||||||||||||||||||||||||||
|
Michael can be contacted by email at egholt@os.dk |
||||||||||||||||||||||||||||||||||||||
